How to Connect TV to Receiver Without HDMI? 6 Methods

Enjoying a tv show Or a movie at home has become much more similar to going to the cinema due to advances in TV picture quality, which have progressed from standard definition to ultra high definition and, most recently, 4K.

However, you won’t notice any changes to the native speakers built into your television unless you upgrade. It means that even while the image on your TV may be clear, you will most likely need an audio system to receive the same level of quality sound.

To get the most out of your TV and receiver, you need to connect them. Remember that a high-quality home theatre system’s audio will improve your gaming, music, and movie-watching experiences.

HDMI cables are commonly used to link the television to the receiver in modern setups. If you don’t have an HDMI jack on either your TV or your receiver, you may be looking for How to Connect TV to Receiver Without HDMI? 

Pairing a smart TV without HDMI with a receiver isn’t tricky, but it can be a little overwhelming at first. If you don’t have an HDMI connection between your TV and your receiver, you could use an RCA cable or an HDMI converter to link the two devices.

You may hear the sound from your television through your home theatre system with only a few different cords.

What Does HDMI Stand For?

As the name suggests, HDMI allows high-definition video and audio to be transmitted via one cable or connector.

The HDMI cable, on the other hand, eliminates the need for a tangle of audio and video connections by providing a single link for both.

However, if you don’t have an HDMI connection, all is not lost; there are a few additional ways to connect.

Essential Connections and Cables 

First, take a careful look at the available ports and proceed from there. We’ll take a look at a few essential alternate solutions based on the capabilities of your kit.

Even if you don’t have an HDMI connector, you may always use the ancient RCA ports in the red, white, and yellow (for audio and video) sockets. You may also see ports in red, blue, and green. 

With them, you’ll have the option of using a variety of colors instead of the conventional yellow when it comes to video.

These will provide you with a far better viewing experience than the previous ones. Here are your plug-and-play alternatives, so let’s have a look at them all at once:

HDMI Converter: 

This next alternative is genuinely the best, so we’re finally able to get down to the business. RCA-to-HDMI signal quality can be improved using this remote unit, which is small enough to be hidden along with the cables.

Using this adorable little device, you attach the red, yellow, and white cords from your device to the small HDMI connector box. To use an HDMI cable with a TV or receiver, you must first plug HDMI ports on your TV or receiver into the converter box.

So now you may turn on the lights and get ready to fight! To take advantage of the higher-quality audio and video transmissions, you can now convert the signal to HDMI for use. Keep in mind that most converters do not contain the cable, so you’ll have to buy one separately.

Coaxial Cable:

A coaxial cable has an inner conductor accompanied by an insulating tubular layer and a conducting shield tubularly shaped. Electronic signals can be transmitted like digital data by using coaxial cable in antennas for radio and television.

RCA Audio Cables:

A standard RCA audio cable has two cables for connecting the various components. Those are the colors red and white, respectively, of the cables you’re referring to.

This particular RCA cable can only transmit audio signals. As a result, you can use the RCA jacks on your TV to connect it to your receiver.

Two connectors are included with this audio cable. You can easily connect the white and red wires to the red and white-labeled jacks without any difficulty.

Keep in mind that the RCA audio cable only transfers sound. You can also find it in any electrical (or technological) equipment store. It is currently selling for less than $10 on the market.

Optical Cables:

Additionally, you can use an optical cable to hook up your TV and your receiver. If you don’t need surround sound, they’re an excellent choice.

The sound quality of optical cables is superior to that of RCA wires; however, optical cables fall short of the quality of HDMI connections. Depending on your preferences, you can get one from a local electronics store or online.

Composite Video Cables:

It used to be usual practice to utilize composite RCA cables to link audio and video from one component to the next. Connectivity is provided by the standard tri-color cable set, red, white, and yellow.

In addition to a yellow, white, and red are RCA analog audio connector. Because just one cable is required to connect video, it is known as a composite video cable.

You can purchase a wide variety of composite video cables at any electronics store. Amazon has a variety of lengths for cables like the CMPLE Composite Video Cables.

Component Video Cables:

You can also connect your TV and receiver using component video connections. Blue, green, and red are the colors used to transmit television signals through these wires. A white and a red audio wire is also included. You can get a component cable that has these five parts.

The 5 RCA component video cable must send audio from your television to your receiver. On the other hand, a component video cable comes in two varieties: one with five RCA components, such as the two audio connectors (white and red) (green, red, and blue). You can use this to hook up your TV to your receiver if you don’t have HDMI.

How to Connect TV to Receiver Without HDMI

How to Connect Tv to Stereo Receiver

Follow the methods mentioned below to connect TV to receiver without HDMI:

Method 1: By Using RCA

Analog stereo outputs (also known as RCA outputs) on TVs can be easily connected to a separate external audio system for better TV listening.

Follow the steps given below:

Step 1: Connect the TV’s analog audio output with RCA wires.

Step 2: Use the analog audio inputs on a home theatre receiver to connect to the other end of the RCA wires.

Step 3: Your TV’s external sound setup instructions will guide you through the process of connecting your receiver or other audio devices.

Step 4: Using your audio system, select the input that your TV is plugged into.

Step 5: Verify whether the receiver seems to have any audio improvement capabilities, such as virtual surround sound, that can broaden the soundstage for a more realistic listening experience while using the analog connection option. 

Step 6: Dolby Prologic II/IIx and DTS Neo:6 are extra audio options available if you’re using a home theatre receiver or a home-theater-in-a-box device. It is possible to extract a surround sound stream from the stereo input.

Method 2: By Using Component Cables

As was previously stated, you can still attach your TV and receiver through component connections if you don’t have HDMI.

Step 1: Please turn on your receiver and your television set-top box.

Step 2: Connect the cables next. “component” is a standard label for your TV and receiver inputs. Again, use the colors as a reference to ensure that they are placed in the correct locations.

Step 3: Activate your newly installed external speakers instead of your system’s default ones. Go to your TV’s settings, then sound, and select external speakers from internal speakers if that is an option.

Step 4: Increase the level and listen to the sound to ensure it’s good. If you don’t hear anything, verify the cables and ensure they’ve been inserted correctly. To swap out a TV or receiver, you only need to disconnect the cables.

Method 3: By Using Composite Cables

First, determine which cable(s) you need to connect your TV’s port to your receiver without HDMI before connecting your receiver via HDMI. It’s up to you if your devices have Composite ports or not. Having the Composite cables and other necessary equipment, you can begin.

Step 1: Get Your TV and Receiver On

Step 2: Start by turning on all of your equipment.

Step 3: Incorporate the Required Cables and Converters.

Step 4: Connect only to the corresponding inputs with care. “Composite” is a common name for these ports. Use the colors to guide you to ensure that the cables are plugged into the correct ports.

Step 5: This depends on the model of your television. Your TV’s main menu contains a section for sound. After that, you’ll need to switch your TV’s default speaker from the built-in one to the external one you just installed.

Step 6: The volume can now be increased to see if any sound is coming out of the speakers if you’ve connected them correctly. As long as you can hear the video’s soundtrack or other sound effects, you’ve established a successful connection. The cables can be unplugged if you ever upgrade your receiver or TV.

Method 4: By Using the Digital-Analog Converter

You can use a digital-analog converter to link an HDMI-enabled TV to a non-HDMI-enabled receiver. The sound quality will improve as a result of this. Making the connections is as simple as following these simple steps.

Step 1: Please turn on your television and receiver.

Step 2: Connect your TV through HDMI.

Step 3: Plug in the adaptor with the cord.

Step 4: Hook up the DAC to your receiver via RCA wires.

Step 5: Change the sound settings on your TV to external speakers by going to the settings menu and selecting sound.

Step 6: Make sure your system is working correctly by testing.

Method 5: By Using HDMI Converter

To take advantage of the higher-quality audio and video signals, you can now convert the signal to HDMI for use. Keep in mind that most converters will not include the cable, so you’ll have to buy one separately.

Step 1: First and foremost, you need an HDMI Converter.

Step 2: Connect your devices to the small HDMI connector box by inserting the red, yellow, and white cables, respectively.

Step 3: To use the converter box, you must first plug the HDMI cable into the HDMI converter box.

Step 4: Connect it to the HDMI input on your television or receiver.

Method 6: By Using Digital Optical

The digital optical audio output connection is preferable for transferring audio from the TV to a receiver or an external audio system.

Step 1: Connect your TV’s digital optical output to a digital optical cable.

Step 2: When using a home theatre receiver or home theatre system with an optical digital input on the other end of the cable, connect the other end to a digital optical input.

Step 3: Setup your TV and receiver after you attach the cable.

Step 4: To hear the music, choose the digital optical input.

Step 5: If your TV’s digital optical connection does not produce any sound on your external audio system, check the TV’s audio output settings for an option called PCM. It may solve the issue. 

Frequently Asked Question

How Do I Hook Up My Smart TV to My Receiver?

Connect your smart TV’s optical audio cable to the receiver’s optical audio input and output jacks. Choose “audio out” from the TV’s menu. Before attaching the optical connection to your receiver, note the input number.

How Do I Connect My RCA Receiver to My TV?

Red and white RCA wires exist. This RCA cable connects the TV and receiver through RCA connections. Connect red and white cables to their jacks.

Can You Wirelessly Connect a TV to a Receiver?

A portable HDMI transmitter might help tidy up a media center. Adding multiple receivers to this system enhances your viewing options so that you may watch your favorite content on more TVs.


If you want to get the most of your home entertainment, you can replace an outdated TV or receiver that doesn’t have HDMI capability. Even if you can’t use a standard HDMI cable to connect your TV and your receiver, don’t worry.

It is up to you to choose which method of approach to Connect TV to Receiver Without HDMI works best for you in terms of cost and material availability.

You can use any method described here to connect your television to a receiver. Like using an HDMI cable, the audio quality will be the same.