By attaching a VESA mount to a flat panel monitor and mounting it to an arm, monitor stand, or the wall, you may free up valuable workspace.
It is ideal for those who work in compact work environments where the monitor obstructs their view. So, here we discuss How to Mount Dell Monitor Without VESA?
Once the VESA mount method established the industry standard for monitor mounting, numerous firms saw the necessity for VESA-compatible mounting systems.
Utilizing a compatible attachment, you can now install a without VESA monitor to a VESA mount. Mounting VESA-compliant monitors is a simple operation.
Almost all monitor and television manufacturers, including Acer, Asus, Benq, Dell, Eizo, Grundig, HP, LG, Philips, Samsung, Sharp, Sony, Telefunken, and Toshiba, provide threaded holes on the back of their screens for attachment to amount system.
The VESA standard determine by the threaded holes’ horizontal and vertical pitch. If the backside of the monitor does not have a VESA port (as is the case with Metz and Loewe models), VESA adapters used.
What is the VESA standard?
VESA is an acronym for the Vehicle Electronics Standards Association. The VESA Video Electronics Standards Association specifies the distance between the mount’s four distinct mounting holes.
How to Determine Whether Your Monitor Is VESA Compliant?
To determine whether or not your monitor or television is VESA compliant, measure the horizontal and vertical distances between the holes on the back of the monitor. If the distance equals one of the above computations, it is VESA compatible; else, it is not.
Is It Possible to Install Monitors Without Using VESA?
Today, the majority of well-designed monitors do not support VESA installation. It is a highly preferable and durable, high-quality EZM VESA Adapter Kit for the most non-VESA Dell monitors from 20″ to 27″ transforms most non-VESA monitors to the standard VESA pattern simply.
How to Mount a Monitor Without Using VESA?
Things to Need
You’ll also want a VESA Conversion Kit.
- Screwdriver
- screws
- monitor stand
- VESA conversion kit
What Is the VESA Conversion Kit?
The VESA conversion kit is a straightforward solution that enables you to mount a monitor that is not VESA compliant to the VESA mount arm.
Where to Purchase an Adapter Kit?
VESA adapter kits are available online at retailers such as Amazon. Certain adapters create specific brand models, such as Acer, HP Pavilion, Dell, and iMac Display. Additionally, there are universal adapters that fit the majority of flat-screen monitors.
The Simple and Efficient Way to Mount a Dell Monitor Without Holes
- To begin, remove your monitor’s present stand and any screws.
- You must purchase the appropriate VESA conversion kit for the screen size of your dell monitor.
- Attach all four holders to the backside of your monitor’s screen from the back.
- Now secure the centre steel kit to the clamps by tightening all screws.
- Finally, secure this monitor adapter to the VESA mount.
The Benefits of the VESA Conversion Kit
- The VESA adapter kit is affordable, and you can easily find one for less than $30. In this manner, you may do your assignment on a budget.’
- You are not required to purchase a new monitor to attach your existing monitor. Utilizing a conversion kit, you can quickly mount your current monitor.
- Finally, the VESA adapter kit is quite reliable, and users have been using it without incident for years.
How to Mount a Monitor Without Vesa by Using Bracket Installation?
Tools Required
- Hacksaw or alternative metal-cutting tool, such as an angle grinder, metal bandsaw, or even a Dremel
- Drilling with drill bit 3/4/5mm bolts, depending on the bolts you choose
- Vice or cinch (for the cutting)
- Marker indelible
- tape duct
- Glue for all purposes
- Pliers
- Bracket sheet
- Nut and bolt kits
Monitor Stands That Conform to the Vesa Standard
Assuming you have this, that is most likely why you are here. If so, please check out my other do-it-yourself projects (coming soon), which range from a self-contained steering wheel horn to an electric jet skateboard!
Procedure For Mounting
- To begin, you must disassemble the monitor, insert a mock-VESA plate, and then reassemble it as if you never disassembled it in the first place. This section, without a doubt, requires some common sense.
- It’s pretty simple to remove the bezel from the display – on the Dell.
- Remove the base first, making sure that all cords are disconnected and set aside. The majority of monitor bases remove by pulling them out. Others may require screws or maybe clipped in.
- Next, we’ll need to pull the monitor bezel off at the connection with anything sharp, such as a screwdriver or pointed plastic object. Take care not to harm the delicate plastic while using a screwdriver. You may hear clips that ‘pop,’ which is precisely what you want.
- Once your fingers insert into the bezel, use them to detach the remainder of the display bezel; however, take caution around the buttons on the monitor, as there may be a controlling cable that needs to be disconnected.
- At this point, the back should lift. That was determined to be the most challenging step.
- Remove the panel very carefully, holding it only by the sides, and place it somewhere safe, such as a panel facing down on a bed. The monitor shell is now empty. Following that, the VESA bracket will constructs.
VESA Bracket Construction
The lattice/custom bracket that You can get from any store should fit snugly against the two holes on the VESA plate on your monitor stand.
There are three VESA template sets available, but You should choose the center one because the two holes are already aligned. Insert two nuts and bolts into these, then mark the locations of the remaining two holes with the permanent marker.
Additionally, note where the plate should slice so that you leave with only the square monitor plate.
Pierce the holes and cut the bracket as necessary, taking care to blow away any metal shavings since these should not come into contact with the monitor’s electrical components.
VESA Bracket Installation
- You need your bracket to fit tightly on the backside of the monitor’s plastic cover since the bolts will clamp it in place, sandwiching the monitor’s back against the VESA stand – just like actual VESA mounts do.
- Remove any overhanging plastics from the plate to ensure it fits snugly against the backside of the monitor. If it’s not secure, you’re going to run into trouble later. You should extracted these standoffs using pliers.
- Using the adhesive, which is optional but simplifies the process, adhere the bracket to the interior of the back cover, levelling and centralizing it.
- Once the glue has dried, drill holes through the plastic that correspond to the drilled holes in your DIY VESA plate and temporarily fasten them with the bolts in, facing away from you precisely as seen in this figure.
- In Tape insulation, you can use duct tape to cover the plate, including the screws, thoroughly. Ascertain that no visible or touchable metal is present. It will temporarily secure the screws and insulate the metal bracket, preventing them from interfering with the monitor’s circuitry.
Reassembling the LCD and Reattaching it to the VESA Arms
- Reinstall the LCD panel gently into the monitor’s front plastic bezel, carefully reconnecting the front power/mode selection cable.
- It makes no difference whether you reassemble the LCD first and then attach it to the arm or attach it to the arm first and then attach the backing back onto the LCD. Connect the LCD’s back (which is still detached) to the VESA arm by simply inserting the VESA arm bracket through the screws that must emerge from the back and tightening with the proper size nuts.
- Put the plastic backing directly over the LCD facing down, then carefully apply light pressure to push the cover back on. You will hear the same popping sounds as when you removed it.
- Replace the single screw, attach the LCD arms to the deck supports.
Frequently Asked Question
Do All Monitors Have Vesa Mount?
Has it now become Your Computer Monitor Compliant with VESA Standards? The majority of new flat-panel monitors and televisions are VESA compliant. Inspect the back of your computer monitor to see if it complies with VESA standards. If your monitor complies, you should notice the regular four-hole screw pattern on the backside.
Can Gaming Monitors Be Mounted?
You may instantly improve your gaming setup by installing a monitor mount and rearranging some of the wire clutter. It takes little time or talent and results in increased desk space and practically endless monitor adjustments.
Can You Mount a Curved Monitor?
To begin, due to their characteristic curvature, curved screens provide significant challenges. Compared to flat displays, which are generally flush with the surrounding wall, curved screens require specialized mounting and positioning.
Conclusion
The primary reason you might want to purchase a monitor without a VESA mount is if you currently own an older or cheap model that does not support the standard. While it may be easier to get a newer model, taking this method will save you a significant amount of money.
Additionally, you may create a multiple-screen arrangement using a single stand, allowing you to recycle an old monitor as a secondary. I hope this post addressed all of your questions about How to Mount Dell Monitor Without VESA?
The majority of these options are universal, which means they will work with most monitors. However, some models would benefit from specialized adapters due to their design. Additionally, brands receive customized adapters, but this presents another issue.
