SOLIDWORKS Rx and the SOLIDWORKS Resource Monitor are excellent tools for optimizing SOLIDWORKS performance. When you’re limited on resources or experiencing graphics card troubles, you can rapidly diagnose and address the problem.
It can be pretty beneficial in theory and practice. The SOLIDWORKS Resource Monitor programmed keeps track of the resources used by your SOLIDWORKS software and your system.
When working with SOLIDWORKS, massive assemblies, when your Windows system resources are finite, you may be overwhelmed with warnings and blaring sounds.
Which in certain situations may prohibit you from completing your work! However, in this article, I’m going to walk you through the process of How to Turn Off SolidWorks Resource Monitor?
Sometimes users receive the following warnings: Available open document capacity is critically low, and WARNING! SOLIDWORKS is operating at a critical level.
Not to nitpick the point, there is nothing fundamentally wrong with the system memory; this is most likely due to the Graphic Device Interface (GDI) objects approaching the Windows-defined default limit.
SOLIDWORKS monitors the SOLIDWORKS process’s GDI object use and displays a series of warnings beginning at 85 per cent of the GDI object limit per process. When you read these alerts, you can take steps to resolve the matter.
Purpose of Solidworks Resource Monitor
When a system’s resources deplete, the SOLIDWORKS Resource Monitor displays warnings in the notification area of the Windows taskbar to prompt you to take action to avoid a system failure or data loss.
The objective of this warning is to indicate that the newly installed SOLIDWORKS does not verify using the SOLIDWORKS Rx tool, which can ensure that your system is correctly configured and optimized.
Additionally, it may show if your Windows resources are depleting. Despite a system check and boosting the available resources, the warning may persist following Windows updates. If the alarm occurs frequently, you can disable it in the Windows settings.
Run System Diagnostics to Examine the Solidworks Monitor Notification Error
It would help run System Diagnostics to determine the cause of the problem at some point.
- Right-click the SOLIDWORKS Resource Monitor icon and choose Run System Diagnostics from the context menu.
- The Diagnostics tab will indicate whether or not you are using a supported graphics card and Driver.
- If not, this is one of the possible causes of the SOLIDWORKS Resource Monitor error message.
How to Check Warnings on Solidworks Resource Monitor?
Click the SOLIDWORKS Resource Monitor icon to re-display the most recent message in the notification section. The SOLIDWORKS Resource Monitor has no graphical interface apart from the icon and letters. If you double-click the icon or tap it before a message appears, nothing displays on the screen.
Why Are GDI Objects the Leading Cause of Notification on Solidworks Monitors?
Windows GDI is an Application Programming Interface (API) used by the Windows Operating System to describe graphical objects and display them on external screens (OS).
The Windows operating system limits the number of GDI objects used by a single process. Each operating system supports a maximum of 10,000 GDI objects per process.
Once a process approaches the 10,000 GDI Object limit, it may become unstable, and you may lose access to the user interface.
What Should You Do When Your Solidworks Resource Monitor Shows Notification?
When SOLIDWORKS identifies that your system is running low on resources, it suggests that you shut down a few applications to free up some help and turn off SolidWorks monitor resources.
This warning notice often corresponds to RAM, VRAM, or GDI Objects on 64-bit computer monitors. You can close the following applications to free some space in response to solid work monitor resources notification.
Before going ahead, you should be familiar with the following terms to Turn Off Solidworks Resource Monitor.
Physical Memory
It is the total quantity of RAM installed on a computer. Windows Task Manager can navigate it> Performance tab or Resource Monitor> Memory tab.
Alternatively, you can use a freeware tool called RamMap to monitor RAM. This tool will provide a more detailed analysis of how Windows allocates physical memory.
Virtual Memory / Page File
It is the SOLIDWORKS process’s virtual address space or VRAM. to navigate virtual memory follow : Control Panel > Administrative Tools > Performance Monitor – Virtual Memory / Page File. Select Performance Monitor from the Monitoring Tools menu, click the green + button to add, select Paging File from the list, click Add >>, and click OK.
Commit Charge
The amount of memory that the operating system has allocated to any active process on the computer.
Desktop Heap
Memory allocated by the operating system for USER Objects such as windows, menu, cursors, icons, and keyboard shortcuts for menus.
GDI Objects
Graphics-related resources such as fonts, bitmaps, brushes, pens, and drawing surfaces. Details tab of the Windows Task Manager
Most Efficient and Easy Way to Turn Off Monitor
- Right-click the SOLIDWORKS Resource Monitor icon in the right-hand corner of Windows.
- “Dismiss Graphics Notifications” should be selected. It is the simplest and most effective method of removing the remainder.
Navigate to the Windows Notifications Settings
To rapidly access the Windows Notification settings, type ‘Notification’ in the search box next to the Windows symbol on the task bar’s left. If the Search Box is not visible, right-click on the taskbar and select Cortana > Search Box.
- Following that, click Notifications & action settings.
- Select the SOLIDWORKS Resource Monitor Notifications that you wish to receive.
- Scroll through the list of notifications and actions until you find the SOLIDWORKS Resource Monitor. If it does not mention, you most likely do not have SOLIDWORKS running, start the application, and it should appear.
- Select an item to access its options — or you can turn them completely off by dragging the slider to the off position.
- You can then select the notifications you want to receive and how you wish to receive them in the SOLIDWORKS Resource Monitor settings window. For instance, you may still choose to receive all notifications, but without the accompanying sound.
Is It Necessary to Manage Physical or Virtual Memory to Turn Off SolidWorks Monitor Resources?
- SOLIDWORKS memory will release by closing and resuming the application. You may add additional RAM to the system to improve Physical Memory performance. If the Paging File counter approaches 100, adding more physical discs or modifying Virtual Memory can help.
- The maximum amount of virtual memory available equals twice the physical RAM installed. Windows manages this virtual memory by default, typically 1.5 times the installed physical RAM.
- It’s worth noting that newer computers running Windows 10 manage RAM use considerably more efficiently than older Windows 7 systems. It recommends leaving the default setting of Automatically control paging size for all drives unchanged.
- Checking the Commit Charge limit in the Resource monitor will reveal which processes commit the most memory. Functions that are no longer necessary may discontinue. It will turn off the solid work monitor resource notifications. As discussed previously, disabling information on the Solidworks monitor resource turn off the Monitor.
How to Upgrade the Custom Size in the Virtual Memory to Tackle the Notification Issue?
The first recommendation is to upgrade the custom size in the Virtual Memory. If this issue rectifies, no changes to the registry settings are required. If this does not work, you will need to alter the registry settings.
Thus, as a starting step:
- To begin, navigate to Control Panel> System > Advanced System Settings Advanced (Tab) > Settings.
- Change > Advanced
- Remove the checkmark next to “Automatically manage paging file size for all discs.”
- Select the Driver for which you wish to use the virtual memory.
- Under Custom size, choose a value that is double the size of the actual RAM installed in your computer. (For example, if you have 32GB, type 64000MB.)
- Enter a value equal to two times the amount of physical RAM present in your system as the Initial size (e.g. If you have 32GB, type in 64000MB.)
- Select ‘Set’.
- Restart your computer.
Monitor the GDI Objects
If the issue remains, we can monitor the GDI objects as a second step:
- Launch Task Manager by right-clicking on the start bar and selecting Task Manager, or press CTRL+ALT+DEL.
- Select the ‘Details’ tab.
- Select the GDI objects by right-clicking on one of the columns and selecting ‘Select Columns’.
Then you can make the following changes:
- Run > type’regedit’ to open Regedit.
- Determine the location of the key: HKEY_LOCAL_MACHINE> SOFTWARE> Microsoft> Windows NT> CurrentVersion> Windows> GDIProcessHandleQuota
- Right-click ‘GDIProcessHandleQuota’ and choose ‘Modify’.
- Modify the registry key to set the maximum number of processes to 16,384; change the BASE to DECIMAL.
Troubleshooting
If the notification does not show, you must run SOLIDWORKS and refresh the window.
When the Check Your System warning is disabled, SOLIDWORKS will no longer display it when the software is used (both for the initial diagnostic notice and low resources).
If you have any questions about optimizing your system or if additional warnings arise consistently while using the software.
Feel free to contact Hawk Ridge Systems at 877.266.4469 in the United States or 866.587.6803 in Canada for other troubleshooting techniques.
Frequently Asked Question
How Do I Disable Solidworks Rx?
Additionally, you can run SOLIDWORKS RX manually by selecting SOLIDWORKS Resource Monitor from the Windows notification area and then click the message that arrives.
Right-click SOLIDWORKS Resource Monitor and select Turn Off Notifications from the context menu to turn off these notifications.
How Do I Turn Off Diagnostics in Solidworks?
When you start SOLIDWORKS for the tenth time, a Check Your System warning appears, recommending that you conduct system diagnostics again.
To turn off these notifications, right-click SOLIDWORKS Resource Monitor in the Windows notification area and select Turn Off Notifications from the context menu.
How Do I Turn Off Resources in Solidworks?
Right-click on the SOLIDWORKS Resource Monitor icon in the Windows right-hand corner. “Dismiss Graphical Notifications” should be selected. It is the simplest and most effective method for eliminating the reminder.
Conclusion
Once your notification settings are specified, you can continue working uninterruptedly by windows. Additionally, to assist you in resolving the issue of How to Turn Off Solidworks Resource Monitor, both practical and inefficient methods discussed above, as well as the causes for the notifications Windows seven and Windows 10 by default, enable a maximum of 10,000 USER / GDI Objects per process.
The Windows Task Manager count may increase due to large assemblies, simulations, or many part files open. Furthermore, you should adjust the notification settings in Windows to remedy the issue.
Alternatively, you can disable solid work monitor resource notifications by freeing up space and stopping other running applications.
Read Also:
