How to Improve Viewing Angle on LCD TV? 8 Ways

The viewing angles of a TV can tell us when an image begins to look distorted when seen off-center from the center of the screen. Whether or not we are aware of it, the image on our TV seems different when we examine it from the side.

Certain televisions are better able to maintain image accuracy when viewed from an angle than others. Wide viewing angles are pretty crucial to search for in television if you need one that looks excellent from various places within a room with a comprehensive seating arrangement.

When seen directly opposite the television screen, the picture on that television will always have the highest possible quality. The colors will get less vibrant as you go further to the side of the screen.

When viewed from different angles, color changes are considered a defect rather than a feature. Several characteristics can sometimes suggest a “viewing cone” as a set of orientations where the screen operates well.

It is in addition to the most fantastic viewing angle that the screen can accommodate. In some situations, the viewing aspect is somewhat limited. So many ways to improve the viewing angles discuss in this article.

How Do You Choose the Best Viewing Angle?

Review points are only predicted up to the high resolution, and the amount of allowed difference varies from supplier to supplier.

The maximum rakish distance between the front and back of a screen without affecting the contrast and brightness. Both CRT and plasma screens have no change at 180 degrees. LCD and front/back-projection survey points are different.

Horizontal and vertical angles almost always differ. Looking up at a screen may be better than looking down, but staring down from the top may be better.

How Do I Accurately Set the LCD Viewing Direction?

The viewing angle of an LCD is the angle generated on each side of the bias angle and is one in which the display’s contrast is still deemed acceptable.

For monochrome LCD panels, the contrast ratio is usually 2:1, but for color LCDs, it is 10:1. A conventional STN character display has a minus 20-degree viewing angle and a + 25-degree bias angle at 1/16th duty cycle.

Consider a 12:00 (top view) display. The display looks best at 25 degrees, just above vertical. If a person moves their gaze 30 degrees above the screen, contrast decreases, but the image is still visible. If the view is moved any higher, the contrast will be unusable.

How to Improve Viewing Angle on LCD TV?

What Type of Tv Has the Best Viewing Angle

By Using The Application of an Orientation Layer of Premium Quality (Polyimide)

To achieve a homogeneous liquid crystal molecular alignment: 

  • Rub the liquid crystal surface with high-quality rubbing fiber and good-quality rubbing equipment.

By Utilizing IPS Technology

Utilizing IPS technology, which is more expensive than other options, is the best way to improve the viewing angle of a panel.

Films and filters can be retrofitted for a solution that is not just effective but also less expensive. By mechanically bonding your display, you can increase the readability of your presentation.

Even if this is not always the case, many people continue to assume that IPS is the only answer. The in-plane switching (IPS) technology is excellent, but it is expensive, and you cannot add it to an old panel. The display screens on the control panel have a broad viewing angle.

But on the other hand, O-film is a material that offers a significant improvement and has the capability of being retrofitted.

With the addition of a polarizing o-film, light may be redirected and spread over a wider area, resulting in improved viewing angles at a cost comparable to that of IPS.

By Modifying the Layout of the LCD

Reduce the number of multiplexes you have to drive as much as possible (duty ratio). The static drive provides the most effective contrast.

By Adjusting Voltage for Best Contrast

The viewing angle is unaffected by adjusting the contrasting voltage, also known as VL. However, it does affect the bias angle. A display designed for a top view 12:00 viewing position can be optimized for a bottom view 6:00 viewing position by altering the contrast voltage.

A display that is set to 12:00 and is viewed from the 6:00 location will not have much contrast as a display that is set to 6:00 and is viewed from the 6:00 position and vice versa.

Displays are designed to be seen head-on virtually all of the time. It is possible to utilize either a 6:00 or a 12:00 module. You can tweak the contrast voltage ever-so-slightly to optimize the display’s specific viewing position in question.

In the above illustration, the field of view of both the 6:00 and 12:00 module overlap the viewing position that is defined as perpendicular, also known as straight on.

By Choosing a Liquid Crystal Material

To Improve Viewing Angle on LCD TV,  follow the steps outlined below:

  • With an Alignment Layer of High Quality, the more contrast there is between the K33/K11 and the V90/V10 (Polyimide)
  • Ensure that the polyimide you use is of high grade (Nissan Chemical)
  • The more significant the K33/K11 proportion and the higher the contrast will be if the voltage is higher.

By Using a Polarizer That Is of a Higher Quality

When the efficacy is higher, the contrast is much more noticeable. It is an important point to remember when it relates to negative displays. Changing to a polarizer with higher efficiency of 99.9 percent will allow you to complete the task.

The polarizer will reflect more light if there is more excellent contrast between it and the surrounding light. The more remarkable difference you can achieve with the help of lighting, the more transmissive the polarizer will be.

By Modification of the Contrast

When the viewing position has been decided, the next step is to settle on the contrast setting. It is done on the prototype units while developing the product.

After that, a potentiometer with a resistance of 10000 ohms is often connected across VDD and VSS in a power supply unit or from VDD to the negatives rail in a module with two independent power supplies. The module’s VL input is connected to the pot’s wiper that controls the volume. 

The LCD is then moved to its standard viewing position, and the pot is modified to have the proper appearance when viewed on the LCD.

After measuring the voltage present on the VL pin, the next step is to select a pair of resistors that will enable the desired voltage to be generated by the production units.

Changing the driving voltage and the contrast is the method that will save you the most money if you want to enhance the viewing angle.

Varied viewing angles necessitate different driving voltages. It is a form of concession. Before we can even begin analyzing the optimal viewing angle, we need to determine the voltage angle.

By Changing Display Mode

When the LCD is utilized indoors or in a dark setting, the contrast will significantly increase; however, the screen will not display correctly when illuminated by merely the ambient light; the cost will also be higher. 

  • Vertical Alignment of Twisted Nematic to Vertical Nematic
  • Vertical Orientation to Wide Viewing Angle VTN is meant by the term “Normal VTN.”
  • Twisted Nematic to Super Twisted Nematic (TN to STN)
  • Negative FSTN Blue STN Super Twisted Nematic to Blue STN Super Twisted Nematic Film
  • FSTN stands for Film Super Twisted Nematic, but FFSTN, which stands for Double Film Super Twisted Nematic, is an abbreviation.
  • Wide Viewing Angle FFSTN, also known as Normal FFSTN, also recognized as Double Film Super Twisted Nematic
  • A change from a negative FSTN, also known as Film Super Twisted Nematic, to an ASTN, also recognized as Automotive Super Twisted Nematic, particularly as the temperature shifts.
  • FFSTN, which stands for Double Film Super Twisted Nematic, and TFT, which is an abbreviation for Thin Film Transistor
  • Also referred to as Twisted Nematic TFT, IPS (In-plane Switching) TFT is another TFT type.

How Can I Improve the Readability of LCD TV Display?

Optically connecting the cover pane to the front of a display does not increase viewing angle but improves aesthetics and readability. This technology eliminates internal reflections between the two glass layers in a display.

The display’s contrast is increased to make it easier to read in bright circumstances. An optically bonded display does not exhibit any shades of grey, even when the screen is off.

Designers suggest clients submit comments early in the design phase to consider the viewing angle, who is using the device, and what will be there. Standing/sitting when viewing a display.

How Do You Determine the Optimal Viewing Angle?

Review points are only predicted up to the high resolution, and the amount of allowed difference varies from supplier to supplier.

Maximum viewing distance from front to back without changing contrast and brightness. 180 degrees changes neither CRT nor plasma panels. LCD and front/back-projection survey points are different.

Horizontal and vertical angles rarely overlap. Looking up provides a better viewing angle than looking down when viewing a screen, whereas looking down from the top provides a better viewing angle than looking up.

Frequently Asked Question

What Provide Higher Contrast and Better Viewing Angles?

In terms of a general working monitor, VA panels offer excellent contrast ratios and brightness and fast refresh rates, and accurate color reproduction.

What Does 178 Degree Viewing Angle Mean?

You can receive the same clear, vibrant picture even if you’re gazing at the screen practically sideways, thanks to this television’s 178-degree viewing angle.

What Kind of Tv Can You See From All Angles?

OLED TVs have the best viewing angles at the moment. With this technology, you may enjoy a clear image from a broad field of view without worrying about the quality degrading too much.


The viewing angle of a television limits optimal picture quality. If you sit at a location wider than the viewing angle, you will have a poorer experience with the image.

It is not relevant for people who watch television while seated directly in front of the screen, but it does make a difference for arrangements in which people sit off to the sides, such as in some living rooms. 

If you need a wide viewing angle, you should obtain a television that can accommodate your requirements. Rearranging your settings is the sole option available if you already own a TV and are looking for a viewing angle that won’t damage the screen. So, I hope this article will help you determine How to Improve Viewing Angle on LCD TV?